Changes between Version 10 and Version 11 of howto/SD_Config
- Timestamp:
- Sep 26, 2013, 9:04:10 AM (11 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
howto/SD_Config
v10 v11 10 10 Each step is discussed in detail below. 11 11 12 The se instructions have been tested with Xilinx ISE 13.4.12 The SD cards shipped with WARP v3 kits are pre-programmed with a known good design that implements a simple counter displayed on the hex displays. To re-program your SD card with this design, use this file: [attachment:w3_sd_newCard.bin.zip] (unzip to retrieve the .bin file). 13 13 14 14 == Generating the .bit file ==