Changes between Version 16 and Version 17 of HardwareUsersGuides/FMC-RF-2X245/FMC
- Timestamp:
- Dec 12, 2012, 5:47:05 PM (11 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
HardwareUsersGuides/FMC-RF-2X245/FMC
v16 v17 74 74 Two pinout files are available to help with using the FMC-RF-2X245 module. 75 75 76 * [export:/Hardware/FMC-RF-2X245/Mango_FMC-RF-2X245_rev1p0_FMC-nets.xls FMC-nets.xls]: this spreadsheet provides the mapping of net name in the FMC-RF-2X245 to the name of the corresponding FMC signal (using the names given in the FMC standard).76 * [export:/Hardware/FMC-RF-2X245/Mango_FMC-RF-2X245_rev1p0_FMC-nets.xls FMC-nets.xls]: this spreadsheet provides the mapping of net name in the FMC-RF-2X245 to the name of the corresponding FMC signal, using the names given in the FMC standard (e.g. HA00, LA10, etc.). 77 77 78 * [source:/Hardware/FMC-RF-2X245/FMC-RF-2X245_WARPv3_Pinout.ucf FMC-RF-2X245_WARPv3_Pinout.ucf]: this text file provides the mapping of FMC-RF-2X245 signals to FPGA pins on the WARP v3 kit, using the standard Xilinx UCF syntax 78 * [source:/Hardware/FMC-RF-2X245/FMC-RF-2X245_WARPv3_Pinout.ucf FMC-RF-2X245_WARPv3_Pinout.ucf]: this text file provides the mapping of FMC-RF-2X245 signals to FPGA pins on the WARP v3 kit, using the standard Xilinx UCF syntax. 79 79 80 80 In both files the RF interfaces on the FMC-RF-2X245 module are referred to as "RF A" and "RF B", matching the labels on the module PCB itself. When the FMC-RF-2X245 module is used with WARP v3 kits, the RF interfaces on the module will usually be referred to as "RF C" and "RF D", respectively, to avoid conflicts with the WARP v3 on-board RF interfaces.