Changes between Version 7 and Version 8 of HardwareUsersGuides/FMC-RF-2X245/FMC
- Timestamp:
- Dec 11, 2012, 10:25:04 PM (11 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
HardwareUsersGuides/FMC-RF-2X245/FMC
v7 v8 15 15 ||= FMC Net =||= Supported Voltages =|| 16 16 || 12P0V || 12.0v || 17 || VADJ || 1.8v - 2.5v ||17 || VADJ || 1.8v - 2.5v [[BR]] (see notes) || 18 18 || 3P3VAUX || 3.3v || 19 19 … … 21 21 * 3P3V is not used 22 22 * 3P3VAUX is only used for the EEPROM 23 * VIO_B_M2C is tied to VADJ , as all LA/HA/HB I/O use the logic level set by VADJ (nominally 2.5v on WARP v3 kits).23 * VIO_B_M2C is tied to VADJ (all LA/HA/HB signals use the logic level set by VADJ) 24 24 * VREF_A_M2C/VREF_B_M2C are unconnected 25 25 * PG_M2C is tied to PG_C2M 26 26 27 '''VADJ note''': the FMC VADJ net is tied to the digital interface power supplies of multiple circuits on the FMC-RF-2X245 module. These interfaces are all specified over the range 1.8-2.5v. However, we have only tested this module on the WARP v3 kit, which ties VADJ to 2.5v. 28 27 29 == FPGA I/O == 28 The FMC-RF-2X245 module uses I/O from the LA, HA and HB banks. However FMC signals HB20(n/p) and HB21(n/p) are unused, for compatibility with the WARP v3 HPC slot. 30 The FMC-RF-2X245 module uses I/O from the LA, HA and HB banks. 31 32 The module drives clocks to two FMC CC pins: 33 34 ||= FMC Net =||= Signal =|| 35 || HA00_P_CC || RFA AD TRXCLK (driven by AD9963 U26)|| 36 || HB06_P_CC || RFB AD TRXCLK (driven by AD9963 U36)|| 37 38 The other LA/HA/HB CC pins on the FMC header are used for general purpose I/O. 39 40 FMC signals HB20(n/p) and HB21(n/p) are not used, for compatibility with the WARP v3 HPC slot. 29 41 30 42 == MGTs ==