Changes between Version 84 and Version 85 of OFDMReferenceDesign/Changelog


Ignore:
Timestamp:
Aug 30, 2012, 9:48:08 PM (12 years ago)
Author:
murphpo
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • OFDMReferenceDesign/Changelog

    v84 v85  
    33= WARP OFDM Reference Design Revision History =
    44== OFDM Reference Design v18.0 (2012-Aug-29) ==
    5 This is our first OFDM Reference Design with support for WARP v3 hardware. The underlying MAC and PHY designs are identical in the WARP v2 and v3 projects.
     5This is our first OFDM Reference Design with support for WARP v3 hardware. The underlying MAC and PHY designs are identical in the WARP v2 and v3 designs. The v18.0 projects will inter-operate at RF between hardware generations.
    66
    77The WARP v3 hardware project is based on the [wiki:HardwareUsersGuides/WARPv3/TemplateProjects#XilinxISE13.4 WARP v3 On Board Peripherals template project], modified with the custom PHY cores and an extra PLB running at 40MHz.
    … …  
    99We've slightly revised the folder structure for bundling the XPS and SDK projects. '''Please see [wiki:../SDK SDK notes] for instructions on re-creating a working SDK workspace for this design.'''
    1010
     11Both projects below are built in '''Xilinx ISE 13.4'''. It may be possible to open them in newer versions of ISE, but we have not tried this.
     12
    1113'''Hardware Changes'''
    12  * Ported OFDM PHY, AGC and rate change filters to Virtex-6 FPGA
    13  * Ported to new support peripherals (radio_controller, w3_ad_controller, etc.) for WARP v3
    1414 * Updated auto-correlation packet detector logic for better dynamic range through the pipeline
     15 * Added WARP v3 support
     16  * Ported OFDM PHY, AGC and rate change filters to Virtex-6 FPGA
     17  * Ported to new support peripherals (radio_controller, w3_ad_controller, etc.) for WARP v3
    1518
    1619'''Software Changes'''
    … …  
    1922
    2023'''Downloads:'''
    21  * WARP v3 Hardware (Virtex-6 FPGA): [http://warp.rice.edu/dl/refdes/ofdm/v18.0/w3_OFDM_ReferenceDesign_v18p0.zip w3_OFDM_ReferenceDesign_v18p0.zip]
    22  * WARP v2 Hardware (Virtex-4 FPGA): '''Coming soon'''
     24 * WARP v3 Hardware (Virtex-6 FPGA): [http://warp.rice.edu/dl/refdes/ofdm/v18.0/w3_OFDM_ReferenceDesign_v18p0.zip w3_OFDM_ReferenceDesign_v18p0.zip] (19MB .zip)
     25 * WARP v2 Hardware (Virtex-4 FPGA): [http://warp.rice.edu/dl/refdes/ofdm/v18.0/w2_OFDM_ReferenceDesign_v18p0.zip w2_OFDM_ReferenceDesign_v18p0.zip] (16MB .zip)
    2326
    2427'''Support:''' Porting the OFDM reference design to WARP v3 was a big project, and it's entirely possible we overlooked something. We welcome any feedback (preferably via [//forums the forums]).