Changes between Version 9 and Version 10 of howto/SD_Config
- Timestamp:
- Aug 31, 2012, 11:52:07 PM (12 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
howto/SD_Config
v9 v10 44 44 '''XPS''': Remember that the XPS-generated system.bit does not include any software application. You can generate a .bin file in XPS, but it's not very useful. We recommend using the SDK steps below to generate a .bin version of the download.bit bitstream which includes hardware and software. 45 45 46 There is one flow where an XPS-generated .bin file is useful. You can configure the FPGA with your hardware design, then connect to the board via JTAG from the SDK and download/iterate/debug software projects. We don't use this flow much, but it will work. to generate system.bin in XPS, open "bitgen.ut" and add the line:46 There is one flow where an XPS-generated .bin file is useful. You can configure the FPGA with your hardware design, then connect to the board via JTAG from the SDK and download/iterate/debug software projects. We don't use this flow much, but it will work. To generate system.bin in XPS, open "bitgen.ut" and add the line: 47 47 {{{ 48 48 -g Binary:Yes