WARP Project Forums - Wireless Open-Access Research Platform

I am getting the following error when trying to generate an executable.elf for my application:

make: *** [IntEth_CSMA_MAC/executable.elf] Error 1

I am using ISE 9.1i and EDK 9.1i. I added my own code in addition to your code in reference design v4. I did not change anything in your code. The linker script was generated successfully. On updating the bitstream, I got the error stated above. Here's a log:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------

WARNING:UtilitiesC:159 - Message file "MDT.msg" wasn't found.
Sourcing tcl file C:/EDK/hw/XilinxProcessorIPLib/pcores/ppc405_v2_00_c/data/ppc405_v2_1_0.tcl ...
Sourcing tcl file C:/EDK/hw/XilinxProcessorIPLib/pcores/plb_bram_if_cntlr_v1_00_b/data/plb_bram_if_cntlr_v2_1_0.tcl ...
Sourcing tcl file C:/EDK/hw/XilinxProcessorIPLib/pcores/plb2opb_bridge_v1_01_a/data/plb2opb_bridge_v2_1_0.tcl ...
Sourcing tcl file C:/EDK/hw/XilinxProcessorIPLib/pcores/plb_v34_v1_02_a/data/plb_v34_v2_1_0.tcl ...
Sourcing tcl file C:/EDK/hw/XilinxProcessorIPLib/pcores/opb_intc_v1_00_c/data/opb_intc_v2_1_0.tcl ...
Sourcing tcl file C:/EDK/hw/XilinxProcessorIPLib/pcores/jtagppc_cntlr_v2_00_a/data/jtagppc_cntlr_v2_1_0.tcl ...
Sourcing tcl file C:/EDK/hw/XilinxProcessorIPLib/pcores/isbram_if_cntlr_v3_00_b/data/isbram_if_cntlr_v2_1_0.tcl ...
Sourcing tcl file C:/EDK/hw/XilinxProcessorIPLib/pcores/isocm_v10_v2_00_b/data/isocm_v10_v2_1_0.tcl ...
Sourcing tcl file C:/EDK/hw/XilinxProcessorIPLib/pcores/dsbram_if_cntlr_v3_00_b/data/dsbram_if_cntlr_v2_1_0.tcl ...
Sourcing tcl file C:/EDK/hw/XilinxProcessorIPLib/pcores/dsocm_v10_v2_00_b/data/dsocm_v10_v2_1_0.tcl ...
Sourcing tcl file C:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_c/data/dcm_module_v2_1_0.tcl ...
Sourcing tcl file C:/EDK/hw/XilinxProcessorIPLib/pcores/plb_emc_v2_00_a/data/plb_emc_v2_1_0.tcl ...
Sourcing tcl file C:/EDK/hw/XilinxProcessorIPLib/pcores/plb_ethernet_v1_01_a/data/plb_ethernet_v2_1_0.tcl ...

Overriding IP level properties ...
INFO:MDT - C:\EDK\hw\XilinxProcessorIPLib\pcores\ppc405_v2_00_c\data\ppc405_v2_1_0.mpd line 45 - ppc405_1 (ppc405) tcl is overriding PARAMETER C_ISOCM_DCR_HIGHADDR value to 0b0000010011
INFO:MDT - C:\EDK\hw\XilinxProcessorIPLib\pcores\ppc405_v2_00_c\data\ppc405_v2_1_0.mpd line 47 - ppc405_1 (ppc405) tcl is overriding PARAMETER C_DSOCM_DCR_HIGHADDR value to 0b0000100011
INFO:MDT - C:\EDK\hw\XilinxProcessorIPLib\pcores\ppc405_v2_00_c\data\ppc405_v2_1_0.mpd line 45 - ppc405_0 (ppc405) tcl is overriding PARAMETER C_ISOCM_DCR_HIGHADDR value to 0b0000010011
INFO:MDT - C:\EDK\hw\XilinxProcessorIPLib\pcores\ppc405_v2_00_c\data\ppc405_v2_1_0.mpd line 47 - ppc405_0 (ppc405) tcl is overriding PARAMETER C_DSOCM_DCR_HIGHADDR value to 0b0000100011
INFO:MDT - C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 41 - plb_bram_if_cntlr_1_bram (bram_block) tool is overriding PARAMETER C_FAMILY value to virtex2p
INFO:MDT - C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_intc_v1_00_c\data\opb_intc_v2_1_0.mpd line 38 - opb_intc_0 (opb_intc) tool is overriding PARAMETER C_FAMILY value to virtex2p
INFO:MDT - C:\EDK\hw\XilinxProcessorIPLib\pcores\jtagppc_cntlr_v2_00_a\data\jtagppc_cntlr_v2_1_0.mpd line 35 - jtagppc_0 (jtagppc_cntlr) tool is overriding PARAMETER C_DEVICE value to 2vp70
INFO:MDT - C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 41 - isocm_bram (bram_block) tool is overriding PARAMETER C_FAMILY value to virtex2p
INFO:MDT - C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 41 - dsocm_bram (bram_block) tool is overriding PARAMETER C_FAMILY value to virtex2p
INFO:MDT - C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_c\data\dcm_module_v2_1_0.mpd line 59 - dcm_0 (dcm_module) tool is overriding PARAMETER C_FAMILY value to virtex2p
INFO:MDT - C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpd line 40 - Push_Buttons_4bit (opb_gpio) tool is overriding PARAMETER C_FAMILY value to virtex2p
INFO:MDT - C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpd line 40 - debugOutputs (opb_gpio) tool is overriding PARAMETER C_FAMILY value to virtex2p
INFO:MDT - C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpd line 40 - LEDs_4Bit (opb_gpio) tool is overriding PARAMETER C_FAMILY value to virtex2p
INFO:MDT - C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpd line 40 - LED_7SEGMENT_1 (opb_gpio) tool is overriding PARAMETER C_FAMILY value to virtex2p
INFO:MDT - C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpd line 40 - LED_7SEGMENT (opb_gpio) tool is overriding PARAMETER C_FAMILY value to virtex2p
INFO:MDT - C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpd line 40 - DIPSWs_4Bit (opb_gpio) tool is overriding PARAMETER C_FAMILY value to virtex2p
INFO:MDT - C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 41 - plb_bram_if_cntlr_2_bram (bram_block) tool is overriding PARAMETER C_FAMILY value to virtex2p

Performing IP level DRCs on properties...

Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...
Sourcing tcl file C:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...
Sourcing tcl file C:/EDK/hw/XilinxProcessorIPLib/pcores/emc_common_v2_00_a/data/emc_common_v2_1_0.tcl ...
Sourcing tcl file C:/EDK/hw/XilinxProcessorIPLib/pcores/emc_common_v2_00_a/data/emc_common_v2_1_0.tcl ...
Sourcing tcl file C:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...
Address Map for Processor ppc405_1
  (0b0000010000-0b0000010011) ppc405_1   
  (0b0000100000-0b0000100011) ppc405_1   
Address Map for Processor ppc405_0
  (0b0000010000-0b0000010011) ppc405_0   
  (0b0000100000-0b0000100011) ppc405_0   
  (0x00004000-0x00007fff) plb_bram_if_cntlr_2    plb
  (0x00400000-0x005fffff) SRAM0_ZBT_512Kx32    plb
  (0x00600000-0x007fffff) SRAM1_ZBT_512Kx32    plb
  (0x21800000-0x2181ffff) iocm_cntlr    iocm
  (0x40000000-0x4000ffff) debugOutputs    plb->plb2opb->opb
  (0x40020000-0x4002ffff) Push_Buttons_4bit    plb->plb2opb->opb
  (0x40040000-0x4004ffff) LEDs_4Bit    plb->plb2opb->opb
  (0x40060000-0x

Last edited by kpatel02 (2007-Sep-27 16:32:17)