Changes between Version 1 and Version 2 of 802.11/ResourceUsage

Timestamp:

Jul 16, 2014, 2:07:57 PM (10 years ago)

Author:

murphpo

Comment:

--

802.11/ResourceUsage

@@ -12 +12 @@
 
 ||=  Resource  =||=  Used  =||=  Available[[BR]]LX240T  =||=  Percent Used  =||
-||  Slice Registers  ||  66469  ||  301440  ||  22%  ||
-||  LUTs (total)  ||  61409  ||  150720  ||  40%  ||
-||  LUTs (as logic)  ||  51384  ||  150720  ||  34%  ||
-||  LUTs (as memory)  ||  6926  ||  150720  ||  11%  ||
-||  Block RAMs (see note 1)  ||  244  ||  416  ||  59%  ||
-||  DSP48 (multipliers)  ||  155  ||  20%  ||
-||  MMCM_ADV  ||  3  ||  12  ||  25%  ||
-||  Ethernet MAC  ||  2  ||  4  ||  50%  ||
-||  IOBs (see note 2)  ||  344  ||  600  ||  57%  ||
+|| Slice Registers  ||  66469  ||  301440  ||  22%  ||
+|| LUTs (total)  ||  61409  ||  150720  ||  40%  ||
+|| LUTs (as logic)  ||  51384  ||  150720  ||  34%  ||
+|| LUTs (as memory)  ||  6926  ||  150720  ||  11%  ||
+|| Block RAMs (see note 1)  ||  244  ||  416  ||  59%  ||
+|| DSP48 (multipliers)  ||  155  ||  768  ||  20%  ||
+|| MMCM_ADV  ||  3  ||  12  ||  25%  ||
+|| Ethernet MAC  ||  2  ||  4  ||  50%  ||
+|| IOBs (see note 2)  ||  344  ||  600  ||  57%  ||
 
- * Note 1: the ISE MAP reports utilization of RAMB36E1 and RAMB18E1 separately, even though these represent overlapping resources in the FPGA. The block RAM usage above lists the total number of RAMB36E1 primitives in the FPGA and {{{num(RAMB36E1) + ceil(num(RAMB18E1)/2)}}} as the number used. See the MAP report below for more details.
- * Note 2: the IOB count includes all IOBs used by the design, not just the RF interfaces. Many of these pins are used for the DDR3 memory interface, Ethernet interfaces, user I/O, etc.
-
-
+ * '''Note 1''': the ISE MAP reports utilization of RAMB36E1 and RAMB18E1 separately, even though these represent overlapping resources in the FPGA. The block RAM usage above lists the total number of RAMB36E1 primitives in the FPGA and {{{num(RAMB36E1) + ceil(num(RAMB18E1)/2)}}} as the number used. See the MAP report below for more details.
+ * '''Note 2''': the IOB count includes all IOBs used by the design, not just the RF interfaces. Many of these pins are used for the DDR3 memory interface, Ethernet interfaces, user I/O, etc.
 
 == MAP Report ==