| 7 | === Requirements === |
| 8 | * 2 WARP SISO or MIMO kits |
| 9 | * 2 PCs with Ethernet interfaces |
| 10 | |
| 11 | === Setup === |
| 12 | 1) Connect each WARP node directly to the Ethernet interface of the PCs |
| 13 | 1) Configure the PC Ethernet interfaces with IP address on the same subnet (10.0.0.1 and 10.0.0.2, for example) |
| 14 | 1) Generate the FPGA configuration file for the design using the OFDM Reference Design project and the noMAC software project |
| 15 | 1) Configure both WARP nodes using the same download.bit |
| 16 | 1) When it's working, the PCs will be able to ping each other, stream video (using [wiki:VLCStreaming VLC], for example), or any other point-to-point network application |
| 17 | |