Changes between Version 4 and Version 5 of SimpleStreamingReferenceDesign


Ignore:
Timestamp:
Aug 5, 2008, 5:50:29 PM (16 years ago)
Author:
chunter
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • SimpleStreamingReferenceDesign

    v4 v5  
    1111== Using the Reference Design ==
    1212
    13 The design itself contains both a transmitter and a receiver. By default, the transmit mode is configured if the design is downloaded to a board with the FPGA board's dip switch set to zero (all four bits to the left). The receive mode is configured if downloaded to a board with the FPGA board's dip switch set to one (top three bits to the left and the bottom bit to the right). If you have a [http://mangocomm.com/index.php?option=com_content&id=5&task=view WARP Analog Board] inserted into slot 4 of the FPGA board, the received constellation can be displayed on an oscilloscope that is capable of displaying the output of DAC1 vs. DAC2.
     13The design itself contains both a transmitter and a receiver. By default, the transmit mode is configured if the design is downloaded to a board with the FPGA board's dip switch set to zero (all four bits to the left). The receive mode is configured if downloaded to a board with the FPGA board's dip switch set to one (top three bits to the left and the bottom bit to the right). If you have a wiki:HardwareUsersGuides/AnalogBoard_v1.1 WARP Analog Board] inserted into slot 4 of the FPGA board, the received constellation can be displayed on an oscilloscope that is capable of displaying the output of DAC1 vs. DAC2.
    1414
    1515== Download ==