Version 4 (modified by welsh, 11 years ago) (diff) |
---|
WARPLab 7
- Downloads
Getting Started
- Sample Buffer Sizes
- Automatic Gain Control
- Examples
- Extending WARPLab
- Debugging Errors
- Porting Code
- Benchmarks
WARPLab 7 Framework...
WARPLab 7 Reference Design
Reference Design Modules
- Node
Interface Group
Baseband
Transport
Trigger Manager
Hardware
Hardware Configuration
System Requirements
- Review the WARPLab 7 System Requirements
WARP v3
Radio Interface
- In the 2 RF Node configuration (ie only RF A and RF B are populated), you should only use the 2RF bitstream in the download.
- In the 4 RF Node configuration (ie all RF interfaces are populated), you should only use the 4RF bitstream in the download.
Dip Switches
- In WARPLab 7.1 and later, the dip switch value of 0xF (ie all switches set to '1'), is reserved for dynamic node configuration.
Debug Header
The debug header is configured by default to map to the following pins:
These pins are not 3.3v compatible! You must use external level shifting to interface with non-2.5v signals. |
NOTE: The Debug Header is defined in the system.ucf and the connections are defined in the system.mhs
- The Trigger output and Trigger input pins above are used with the Trigger Manager
Clock Configuration
- Detailed information on the WARP v3 Clocking configuration can be found here.
- To adjust the MMCX Clock Module functionality, please use the following SIP switch settings:
Ethernet
- By default, only Ethernet connection A (Eth A) is used.