You are not logged in.
Hello, I am trying the 802.11 reference design, and the putty prints as below and nothing else. So could anyone help me?
----- Mango 802.11 Reference Design -----
----- v0.95 Beta ------------------------
----- wlan_mac_ap -----------------------
Compiled Apr 25 2015 16:07:45
DRAM SODIMM Detected
Queue of 4000 placed in DRAM: using 16000 kB
Initializing Event log (1040580608 bytes) at 0xC1FA0000
Setting up 200 DMA BDs
WARPNet v2.1.0 WLAN EXP v0.9.5 (compiled Feb 12 2015 21:39:03)
ETH B MAC Address: 40:D8:55:04:23:69
ETH B IP Address: 10.0.0.0
Configuring ETH B for AXI FIFO mode with 1514 byte buffers (1 receive, 1 send)
Listening on UDP ports 9500 (unicast) and 9750 (broadcast)
Not waiting for Ethernet link. Current status is: not ready.
Make sure link is ready before using WARPNet.
!!! Waiting for Network Configuration !!!
End WARPNet WLAN Exp initialization
WLAN MAC AP boot complete:
SSID : WARP-AP
Channel : 1
MAC Addr: 40-D8-55-04-23-68
At any time, press the Esc key in your terminal to access the AP menu
Offline
That's the expected UART output when the AP application boots. The UART will print additional messages when clients join and leave the network.
Also, please use the latest version of the 802.11 Reference Design (currently 1.2). We have fixed many bugs and added many features since the v0.95 beta release.
Offline
First, if possible, you should really be using the latest 802.11 reference design. As of this post, we are on version 1.2.
I'm not sure I understand the issue. What you have pasted is the startup message for the AP. Are you saying that you are not able to associate with the AP or access the AP menu when you press the Escape key? Does anything else on the board look out of the ordinary? Are you able to use other reference designs, such as WARPLab, with the board?
Offline