Steps for Testing New FPGA Board
- Mount jumpers for MGT supplies (J17, J18, J19, J20) for DC coupling (short bottom two pins of each three pin header)
- Add screws to 5 screw terminals (6/32"x1/4" machine screws fit)
- Add two reinforcing screws & nuts to CompactFlash connector (2/56"x1/2" machine screws fit)
- Add four posts to corner mounting holes so board doesn't rest on bottom-side components
Last modified 18 years ago
Last modified on Feb 20, 2006, 11:24:54 PM