wiki:HardwareUsersGuides/RadioBoard_v1.4/UserIO

WARP Radio User I/O

Three LEDs are tied to daughtercard pins. These LEDs are controlled by the user design in the FPGA. By default (i.e. if you use the standard radio controller and radio bridge cores), these LEDs are mapped as follows:

ColorComponentDefault Function
RedD2Glows when radio PLL is not locked to reference
YellowD3Glows when radio receiver is enabled
GreenD4Glows when radio transmitter is enabled
Last modified 15 years ago Last modified on Jun 4, 2009, 2:02:22 AM