WARP v3 AD Bridge (w3_ad_bridge)

The w3_ad_bridge core implements the I/O logic for interfacing user designs with the digital I/Q interfaces of the AD9963 ADCs/DACs on the WARP v3 board. The AD9963 digital ports are double data rate (DDR) interfaces with interleaved I/Q. The w3_ad_bridge core uses IDDR and ODDR primitives in the FPGA IOBs to efficiently translate between the external interleaved I/Q ports and internal separate I/Q busses.

The w3_ad_bridge core is packaged as a pcore which can instantiated in an XPS project. The design has been tested in hardware using Xilinx ISE 13.4. The w3_ad_bridge core does not attach to a processor bus, so there is no driver.

The current version of the w3_ad_bridge core is v3_00_g.

Tx Path

Hardware

The MHS snippet below shows the w3_ad_bridge instantiation used in the WARP v3 reference projects.

#Top level ports

Source

The full hardware and software source code is available in the repository: PlatformSupport/CustomPeripherals/pcores/w3_ad_bridge_v3_00_g. The VHDL, Verilog and C source code are made available under the WARP license.

Changelog

2012-Aug-12:

• Created w3_ad_bridge_v3_00_g, branched from w3_ad_bridge_v3_00_f
  • Separate sys_samp_clk ports for Tx/Rx paths, to enable different ADC/DAC data rates